Advertisement
There is no display on my TVIHDTV screen
Check all the Cable ends are positioned correctly when connecting.
Make sure lmpact Acoustics is secured and correct install with your TV or
HDTV. (Please refer to the Hardware lnstallation in Chapter 2.312.4 or1
page 4 and page 5)
Check with your TVIHDTV setting, select the external input source (for
example: Video
lmpact Acoustics.
If you are using the laptop computer, please make sure its has been
switched to External VGA display mode (Please refer to your laptop's
manual).
If you connect Impact Acoustics to TV, you have to press the
If you connect Impact Acoustics to HDTV, you have to press the
ion
Check the connection between lmpact Acoustics and PC VGA port.
Make sure your PC is turn on and display properly on PC monitor.
If you are using the laptop computer, please make sure its has been
switched to External VGA display mode (Please refer to your laptop's
manual).
1. Press the Power Button on lmpact Acoustics box or Remote Control. The
LED will light up on the front of the panel.
2. Please make sure the Power Adapter is securely connected into an
electrical outlet and connected to the lmpact Acoustics DC-IN Jack.
3. To avoid damaging your lrnpact Acoustics, use only the supplied Power
Adapter.
Check the power source using another electrical device to make sure the
4.
power source is supplying sufficient voltage,
is secured and correct connect with your
to the Hardware Installation in Chapter 2.2
Advertisement
