Advertisement
tep 1: Turn off your
: Disconnect the Monitor Cable from your computer VGA port.
: Connect the Scan Converter to PC VGA port:
Plug one end of the supplied "V
other end to the PC's VGA port.
: Connect the Scan Converter to PC Monitor:
Plug one end of PC's Monitor Cable to the Scan Converter box
: Connect one end of supplied
other end to an electrical outlet
ate: To
avoid
damaging your Scan Converter,
S-Video Input.
ote: The converted Computer Image will transfer
Port" by using the S-Video Cable or Composite Vide1
isconnect
to the Scan Converter box "
use
only
(Please refer to Figure 2 on page 3)
the
supplied Power
Adapter.
(Please refer to Figure 3 as below)
to
through "S-Video (NTSCIPAL) Output
Advertisement
