Advertisement
blurry and fuzzy, which won't look exactly the same as the original image
displayed on VGA monitor.
Blurry fonts on television are really a limitation of the TV set and the analog
video signal. There are many things you can do to improve the situation.
Composite video.
2.
Please adjust your VGA display Modes as 640~480(60Hz),
your TV.
3.
Please adjust CONTRAST, SHARPNESS, QIJAI-ITY, and FLICKER
Control setting on lmpact Acoustics.
4.
Increase the sire of the fonts being displayed on you PC. The small text
sizes commonly used for PC can appear blurred or unclear on a TV. You
can adjust VGA setting by using large fonts. (Please consult your VGA
card documentation for more detail information)
Picture appears black and white on the TV
Impact Acoustics Scan Converter offer both NTSC and PAL Video output
system in the same unit. Depending on where you plan on using your scan
converter, you can determ~ne your lrnpact Acoustics Video output system
specification
(Please consult your television documentation to determine whether your TV
Remote Contr
2. If your VGA resolution or refresh rate (vertical frequency) is too high,
please change your setting and selecting the properly VGA Modes.
Advertisement
