Door Disassembly
Remove door assembly, refer to "Door Replacement".
Replacement of door components are as follows:
1. Place door assembly on a soft cloth with latches
facing up.
As the engaging part of choke cover and door
panel are provided at several places, do not force
any particular part.
2. Insert a putty knife (thickness of about 0.5mm) into
the gap between the choke cover and corner portion
of door panel as shown in Figure 4-8 to free
engaging parts.
3. Lift up choke cover.
4. Now choke cover is free from door panel.
Figure 4-8. Door Components
Component Teardown
4-11