Measuring Time (Stopwatch Mode) - Silvercrest KH 8105 Operation & Safety Manual

9. Press the "EAR" button
measurements.
10. The appliance automatically switches off if it is not
operated for longer than 1 minute. This application is
not stored in the device.
In order to return to standard mode, proceed as follows:
1. Press the "FOREHEAD" button
button
3
display
5
and time, as well as the
2. You are now back in standard mode.
©

Measuring time (stopwatch mode)

The integrated watch can be used as a stopwatch in the
range of 0.01 seconds to 3 minutes. This function is required
to calculate the pulse rate. The appliance has to be switched
over to stopwatch mode to do so.
1. If the sleep mode has been activated, activate the
thermometer again by pressing any button before
taking a measurement.
2. Press the "FOREHEAD" button
button
3
display
5
3. The stopwatch is started by pressing the "FOREHEAD"
button
4
3
repeatedly at the same time until the LC
again shows the room temperature, date
repeatedly at the same time until the LC
shows the
and stopped by pressing it again.
again to carry out further
and the "EAR"
4
symbol (Illustration D).
and the "EAR"
4
symbol (Illustration F).
Operation
GB/IE 23