Hitachi DH 24DVA Technical Data And Service Manual page 11

E. Groove digging and edging (hammering only)
Cold chisel
(SDS-plus chank)
Code No. 316657
F. Grooving (hammering only)
Grooving chisel
(SDS-plus shank)
Code No. 316659
G. Drilling holes and driving screws (rotation only)
Drill chuck, chuck adapter (G), special screw and chuck wrench
Special screw
(Note)
If the tool is to be used for loosening screws, open the three jaws of the drill chuck and securely fix the drill chuck
to chuck adapter (G) with the special screw (a left-hand threaded M6 screw) when mounting the drill chuck onto
chuck adapter (G).
Drill chuck and adapter set (SDS-plus) (including a-c)
a.
Chuck adapter (G) for SDS-plus shank system
b.
13 mm (1/2") Drill chuck 13VLRB-D (with chuck wrench)
c.
Special screw (M6 left-hand threaded)
Cutter
(SDS-plus shank)
Code No. 316658
13 mm (1/2") Drill chuck
(13VLRB-D)
Chuck wrench
Part name
Chuck adapter (G)
(SDS-plus shank)
Code No.
321825
303623
321814
981122
--- 8 ---