KNOW YOUR JIG SAW
See Figure 1.
Before attempting to use this tool, familiarize yourself with
all operating features and safety rules.
TOOLLESS BLADE CLAMP
Your saw has a blade clamp design that does not require
the use of a tool (blade wrench) when installing or removing
Your saw is equipped with a lock-off button which reduces
the possibility of accidental starting. The lock-off button is
located on the handle above the switch trigger. You must
depress the lock-off button in order to pull the switch
trigger. The lock resets each time the trigger is released.
NOTE: You can depress the lock-off button from either the
left or right side.
To turn your saw ON, depress the lock-off button and pull
switch trigger. Release switch trigger to turn your saw
This product has been shipped completely assembled.
Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list
Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
If any parts are damaged or missing, please call
1-800-932-3188 for assistance.
Orbital Jig Saw
This tool has a variable speed switch that delivers higher
speed with increased trigger pressure.
When not in use, you can place the blades provided with
your orbital jig saw in the storage area located on the
back of the saw.
ORBITAL ADJUSTMENT KNOB
Choose from four orbital adjustment positions for fine to
The design of the orbital jig saw provides for easy
handling. It is designed for comfort and ease of grasp
when operating in different positions and at different
this tool until the missing parts are replaced. Failure
to do so could result in possible serious personal
or create accessories not recommended for use
with this tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
could cause serious personal injury, always remove
the battery pack from the tool when assembling
If any parts are missing do not operate
Do not attempt to modify this tool
To prevent accidental starting that