4.2 Repair
If despite strict observance of the manufacturing and testing method the tool should happen to fail, it
must be repaired by an authorized agency. Any replacement needed for the connecting line must be
installed by the manufacturer or its agent if safety risks are to be eliminated.
4.3 Warranty
In the event of the tool being improperly handled, used for purposes for which it is not intended and/or
of the service and maintenance instructions not being observed by non-authorized persons, no warranty
shall be in effect for damages/consequential damages. Complaints can only be honoured if the machine
is returned in the undissembled condition.
4.4 Storage
Temperature range during operation
Max. relative air humidity
4.5 Disposal / environmental compatibility
This machine consists of materials which can be disposed of in a recycling process. Before disposal,
render the machine unusable. Do not throw the machine into the garbage collection. According to
national regulations this machine must be disposed of in an environmentally compatible recycling
process.
-15°C upto +50°C
90 % at + 30°C
65 % at + 50°C
8