Teltonika T-BoxN12R User Manual page 21

If the connection is OK, you should a window as shown in Figure 2. The green-blue
connector in the lower right corner of the window denotes that the connection was
established.
Figure 2. Nokia Configurator window, which is seen after connection
establishment
4) If you are not sure which
COM port you connected T-
BoxN12R to, you could try to
detect that with Hyper Terminal
utility. This program is usually
found in
98/ME/200/XP. You should find
it in "Start->Programs-
>Accessories->Hyper Terminal". If
you can't find it, it could possibly
be not installed. You should click
"File->Properties" in the main
Hyper Terminal window. Select the
first possible COM port and click
"Configure". You should select the
settings as shown in Figure 3. Then
click "OK" to close "COMx
Properties" window
"OK" to close
window. Then click "Call->Call".
You should see something similar
to Figure 4. New characters should
appear instantly. If they do, the
selected COM port is the one, to
which T-BoxN12R is connected. If not, there is no connection and you should try the
Windows
and click
"Properties"
Figure 3. Hyper Terminal "Properties"
window
21