Advertisement
TO INSTALL AN AFTERMARKET RADIO WHILE
KEEPING THE FACTORY AMPLIFIER AND SPEAKERS
1
Disconnect the negative battery terminal
to prevent an accidental short circuit.
2
Unplug the power and output connectors
from the factory radio. (Figure A)
3
Splice the wire from the aftermarket
radio to the power and amplifier integra-
tion harnesses using the color code on
page 4 and the instructions included with
the aftermarket radio.
(Figure B)
4
Plug the power and amplifier integration
harnesses into the factory power and
output connectors.
5
Re-connect the negative battery terminal
and test the unit for proper operation.
1
A
B
(A) Strip wire ends back 1/2"
(B) Twist ends together
(C) Solder
(D) Tape
2
NOTES
3
Advertisement
