Optional Equipment; General; Installing Optional Equipment; Radio/Cd Player - Xo 200 S CC User Manual

7 OPTIONAL EqUIPMENT

7.1 GENERAL

NOTE!
if not carried out properly, many installation and modification ope-
rations can damage the boat structure or create a safety hazard.
Please contact the manufacturer before you or somebody else
does any of the following: construct new earthing points or hat-
ches, fasten or install new equipment on the boat, or mount other
metal alloys to aluminium.
NOTE!
if you or somebody else installs optional equipment on the boat,
use insulating washers made of non-conductive material under
the surface that is in contact with the treated aluminium surface
(i.e. under the mounting surface of the equipment or screw head).
30

7.2 INSTALLING OPTIONAL EqUIPMENT

XO 200 S CC can be equipped with a range of optional electrical
equipment for which the necessary circuits are already fitted and
wires routed. Below is a description of the possible optional equip-
ment and the location of appropriate wiring. For more detailed instal-
lation and operating instructions, refer to the instructions supplied
by the equipment manufacturer.

7.2.1 Radio/CD player

A wire harness for installing a car radio/CD player on the boat is
available as an option. The head unit is to be installed on the port
console under a sliding cover. The wire harness is equipped with an
Euro connector, which contains the constant power supply by-pas-
sing the main switch for the radio memory function, the main power
supply via the main switch, and the necessary wires for two spea-
kers. The speaker wires are routed to each console, and the spea-
kers are to be installed on the footwell wall.