Xo 200 S CC User Manual page 27

NOTE!
• The tensile strength of the lines or chains should normally not
exceed the strength of the fastening point in question.
• Always attach the tow line so that it can be detached under load.
• When towing another boat or being towed, always drive slowly.
if the boat you are towing is of the displacement hull type, never
exceed its hull speed.
TOWING AND MOORING
(Figure 7)
1
Fastening points (cleats) for towing, mooring and anchoring Eye for trailering
WARNING!
the tow line is subject to high tension. if the line breaks, the loose
end could cause death due to high speed. always use a line that is
sufficiently thick, and never stand in line with the tow line.
cleats is 15.2 kN and for the aft cleats 12.9
The strength rating for the front cleat
in towing and anchoring is 18.6 kN.
For mooring purposes, the forward
force rating for the front and centre
kN.
27