Cordless Shaving - Silvercrest SRR 3.7 C4 Operating Instructions Manual

Cordless shaving

CAUTION! MATERIAL DAMAGE!
► This appliance is not suitable for wet shaving!
This shaver can be used without the power cable. In this case, you
must charge the appliance before initial use (see section "Charging
GB
the rechargeable battery with/without the charger").
1) If not already attached, attach the protective collar
bottom onto the cutting unit
2) Fit the cutting unit
the drive shaft
correctly onto the hand element.
3) Remove the protective cap
4) Press the ON/OFF button
charge indicator
as soon as the shaver starts up.
NOTE
► The best results are achieved if used on dry skin.
► It can take 2 to 3 weeks until the skin is accustomed to the
dry shaving system.
5) Move the shaving heads with straight and circular motions over
the skin.
6) After you have covered all the areas you want to shave, press
the ON/OFF button
pears at once.
7) Clean the shaver after every use with the supplied brush
For a more thorough cleaning, read the section "Cleaning and
care".
56
(see fold-out page).
with the attached protective collar
. Make sure that the protective collar
.
. The symbol
and the
. The appliance stops. The display disap-
from the
onto
is fitted
of the battery
logo are displayed
.
SRR 3.7 C4