Playlists - LOTOO PAW 5000 User Manual

3. Use the Jog Wheel (09) to select Folder and press the confirm
button (10).
4. Use the jog wheel (09) and Back/Setup button (14) to navigate
to the desired folder.
5. Select a song with the jog wheel (09) and start it playing by
pressing the confirm button (10). The songs in this folder will now
proceed to play in a random order.
To play all the songs on the installed SD card at random:
1. After initiating random play, return to the main play screen.
2. Press the Music/Function button (13).
3. Use the Jog Wheel (09) to select All and press the confirm
button (10).
4. Select a song with the jog wheel (09) and start it playing by
pressing the confirm button (10). All the songs on the SD card
will now proceed to play in a random order.

8. Playlists

The Lotoo PAW 5000 allows the user to create and manage three
individual playlists, populated by songs stored on the Micro SD card.
To add a song to a playlist:
1. Navigate to the desired song using the jog wheel (09) and
confirm button (10).
2. When the desired song is found, highlight it using the jog wheel
(09) and hold the confirm button (10).
3. Select the desired playlist using the jog wheel (09) and press the
confirm button (10) to add the song to that playlist.
To play songs in a playlist:
1. From the main play screen, press the Musis/Function button (13)
2. Use the Jog Wheel (09) to select the desired playlist and press the
confirm button (10).
3. Select a song using the jog wheel (09) and push the confirm
button (10) to begin playing. The songs in the playlist will continue
to play in sequence unless random play is initialised (see chapter
7 – Random Play).
To manage songs in a playlist: