Index 1. What is the Lotoo PAW 5000 2. What’s in the box? 3. Key definitions 4. Getting started 5. Connections 6. Navigation 7. Random play 8. Playlists 9. PMEQ 10. Function button 11. Sports mode and the running armband 12.
Embedded in the core of the PAW 5000 is a high performance Blackfin 514 digital signal processor that prepares the digital signal before it reaches the DAC section for fast and accurate conversion into the analogue signal.
Installing the Micro SD card Insert a blank Micro SD card into the slot on the base of the PAW 5000. Push the card until you hear click sound and then release. The card should remain in position inside the PAW 5000.
Transferring music to the PAW 5000 The Lotoo PAW 5000 utilises a USB 3.0 for fast file transfer from PC or Mac. To transfer file to the Lotoo PAW 5000: 1. Power on the Lotoo PAW 5000.
1. Power on the Lotoo PAW 5000. 2. Connect your Mac or PC to the USB 3.0 port on the PAW 5000 (found on the right hand side of the unit) using the included USB 3.0 cable.
Use the Jog Wheel (09) to select your desired song and press the confirm button (10) to start playing. 7. Random Play The Lotoo PAW 5000 is capable of playing songs at random. To initiate random play: 1. From the main play screen, hold the Back/Setup button (14).
8. Playlists The Lotoo PAW 5000 allows the user to create and manage three individual playlists, populated by songs stored on the Micro SD card. To add a song to a playlist: 1.
(to remove the song from the playlist) and press the confirm button (10). 9. PMEQ The Lotoo PAW 5000 includes a parametric EQ (PMEQ) and Lotoo’s proprietary ATE (Acoustic Timbre Embellisher) voicing algorithm. ATE uses DSP technology to apply Lotoo’s studio-quality filters to the PAW 5000.
(10). This will overwrite the current PMEQ setting in that preset. 10. Function Button The Lotoo PAW 5000 features a Function button that can be assigned to perform many different functions. To assign a function to the function button: 1.
Sports Mode Settings menu. The Running Armband The Lotoo PAW 5000 includes an armband and cradle to allow the listener to use the player while running. To set up the PAW 5000 for running: 1. Remove the packaging and cellophane wrapper from the armband and cradle.
12. Other Functions The Lotoo PAW 5000’s screen will turn off to conserve power after 30 seconds of inactivity. To turn the screen back on, press the power/lock button (16). With the screen off, the listener can still adjust volume by using the Volume Up and Volume Down buttons (05 and 06).
Page 14
Signal to noise ratio: >100dB (20Hz - 20kHz, A-weight) • 16. Contact Lotoo This manual was created by KS Distribution, the UK distributor for Lotoo. For sales and support in the UK and Germany, please use the contacts below: Website: http://www.lotoo.cn/...