Connections - LOTOO PAW 5000 User Manual

8. Press the Back Button (14) several times until you are back at the
main music screen.
Transferring music to the PAW 5000
The Lotoo PAW 5000 utilises a USB 3.0 for fast file transfer from PC or
Mac. To transfer file to the Lotoo PAW 5000:
1. Power on the Lotoo PAW 5000.
2. Connect your Mac or PC to the USB 3.0 port on the PAW 5000
(found on the right hand side of the unit) using the included USB
3.0 cable.
3. When prompted to start the USB communication, use the Jog
Wheel (09) to select Yes and press the confirm button (10)
4. The PAW 5000 will appear as a removable disk on the connected
computer.
5. Drag and drop your music files onto the PAW 5000. We
recommend that each artist is located in a separate folder, and
each album by that artist is in a separate sub-folder within that
artists' folder.
6. When the data has finished transferring, eject the PAW 5000
using your computer's file management system.
7. Disconnect the PAW 5000 from your computer.
8. The PAW 5000 will now update the database. When prompted,
press the Confirm button (10).

5. Connections

There are several ways to connect your Lotoo PAW 5000:
• Line Out/SPDIF (01) – This output can be used when connecting
to an external amplifier or digital/analogue converter. The
output doubles as an analogue and optical output. When
connecting to an analogue amplifier, we recommend using a
3.5mm jack cable. When using the optical connection, we
recommend using a mini-TOSlink cable.
• Headphone Output (02) – This output is compatible with
headphones that terminate in a 3.5mm stereo jack connector.
• Balanced Headphone Output (03) – This output is compatible
with balanced headphones that terminate in a 2.5mm jack
connector.