System Signal Flow & Connections - BLUE SKY Sky System One SAT 6.5 MK II Owner's Manual

8. System Signal Flow & Connections
�������� ���������� ������� ���� ��������� �������� ���������� ������� ���� ���������
2.1 SYSTEM SIGNAL FLOW & CONNECTIONS
Above is a simple diagram showing a Sky System One / 2.1 Monitoring system.
The diagram shows a stereo signal going from the source, to the subwoofer and
from the SUB outputs to the inputs on left and right SAT 6.5 MK II monitors.
Cable and connector wiring
Use high-quality, shielded cables to connect your console, workstation or
other sources to your Blue Sky Monitoring system. Foil-shielded cables, such as
Belden 8451, 8761, or 9501 should do quite well. Other high quality cables are
available and those that incorporate better shielding will yield an overall higher
noise rejection, lowering your systems susceptibility to external interference.
Another important tip to keep in mind when wiring your system is to route all
line level cables away from the AC and other power sources, this will reduce
the probability of having AC hum emanating from your monitoring system.
Page 9