Related Manuals for BLUE SKY Sat 6D
Summary of Contents for BLUE SKY Sat 6D
- Page 1 Blue Sky Sat 6D Studio Monitor Owner’s Manual Sat 6D Owner’s Manual, V1.0 www.abluesky.com...
- Page 2 Please take a few minutes to read through this owner’s manual prior to using your Blue Sky Sat 6D monitors. This will help you to understand the basic functions and capabilities of the monitors. It will also allow you to maximize the exceptional performance for which they were designed.
-
Page 3: Table Of Contents
Contact Information…………………………………………………………………………………...Page 14 Please contact Blue Sky International if you have questions not addressed in the owner’s manual. www.ablusky.com This product is manufactured in the United States of America. © 2014 by Blue Sky International. All rights reserved 3 ... -
Page 4: Safety Information
Blue Sky Sat 6D Owner’s Manual, V1.0 IMPORTANT SAFETY INSTRUCTIONS Warning: Permanent hearing loss may occur if studio speaker systems are used at high volume for any prolonged period of time. Please exercise good judgment when playing back your music material. - Page 5 10. The Sat 6D must be placed on a firm, level surface where it is not exposed to dripping or splashing liquids.
-
Page 6: Design Features
The electronics are designed and assembled in the USA. Transducers The Sat 6D has a custom USA designed and built 6 ½” cast frame woofer with a neo radial motor structure, and a 1” Scan-Speak ring radiator tweeter made in Denmark. -
Page 7: Modes Of Operation
The Sat 6D can be set to operate in 4 modes of operation. Mode # 1 The default Blue Sky mode for the Sat 6D is in the 80-hz sealed setting with 80-hz filter off. This mode uses the default sealed plate on the rear of the Sat 6D. -
Page 8: Back Panel Layout
through would go from the Digital output / Thru to the Digital input on the right Sat 6D.) This input is for connecting to a computer to make system adjustments, and for loading new Blue Sky firmware updates. -
Page 9: Switch Settings
Engage the 80-hz filter when running ported with a Sub 12D. Digital Input Default factory setting is Left. If using the Digital Output, and the Digital Input is into a Sat 6D is selected as Left, please makes sure to change the other Sat 6D to Right. ... -
Page 10: Connection Steps
XLR input, or AES XLR input on the Sat 6D. 4. If you are using a Blue Sky Sub 12D in a 2.1 mode, connect the outputs of your mixing console or computer workstation to the appropriate analog balanced XLR input, or AES XLR input on the Sub 12D, THEN, connect via the Analog or Digital outputs on the Sub12D to the required input on the Sat 6D. -
Page 11: Specifications
Blue Sky Sat 6D Owners Manual, V1.0 Specifications SYSTEM PERFORMANCE - +/- 1.5 dB 45 Hz to 20,000 Hz (full range input) - +/- 1.5 dB 80 Hz to 20,000 Hz (bass managed input) Product Dimensions - 13” x 8” x 11 3/4” (H x W x D w/ heat-sink) -
Page 12: What Comes In The Box
IMPORTANT ! Save all packing materials! They are custom designed to protect the unit during transportation or shipping. If the packing becomes lost or damaged, please contact your dealer, or Blue Sky before attempting to transport your unit 12 ... -
Page 13: Warranty
Owners Manual, V1.0 Warranty Our goal is for you to be happy with your Blue Sky International product, and we will go the extra yard to make sure this is always the case. You can count on that pledge! Blue Sky warrants the materials, workmanship, and proper functioning of this product for a period of two years from the date of purchase as long as the product was operated in accordance with its operating manual. -
Page 14: Contact Information
Please contact Blue Sky if you have questions not addressed in the owner’s manual. This product is manufactured in the United States of America. © 2014 by Blue Sky International. All rights reserved. 14 ...