Sat 6.5 Mkii Mounting And Placement - BLUE SKY Sky System One SAT 6.5 MK II Owner's Manual

7. SAT 6.5 MK II Mounting
& Placement
Monitor mounting and placement is often an afterthought, but in order to get
the best imaging and overall performance from the SAT 6.5 MK II, it is important
to place the speakers correctly.
Monitoring Height:
Figure 2 shows the ideal monitoring height, with the SAT 6.5 MK
II located perfectly at seated ear height. If this is not possible,
tilting the cabinet at the listening area can improve high-frequency
coverage.
Monitoring Angle:
The recommended position for the monitors is based on an ITU
standard and sets the speakers at 60 degrees from the listener,
forming an equilateral triangle (a triangle with equal sides) - See
Figure 3. Fortunately, this setup eliminates most of the math and
is easily simplified to the following guidelines: If you want to sit 2
meters from the speakers, place the speakers 2 meters apart. If you
want to sit 9 ft. from the speakers, place the speakers 9 ft. apart
Etc.
Wall Mount Options:
The SAT 6.5 MK II is compatible with OmiMount® 60 Series
brackets, via the 1/4 X 20 inserts located in the bottom of the
cabinet. The OmniMount® type 60 brackets are designed to
support up to 60 pounds of weight when properly installed.
Please visit www.omnimount.com for more information, including
detailed mounting instructions.
Dimension] for more information on insert locations.
Page 8
Please see page 14 [Cabinet
Center of the tweeter
Center of the woofer
Mid-point of the woofer and tweeter
Figure 2
MONITORING HEIGHT
RECOMMENDATIONS
Figure 3