Recording From A Tape - Sony LBT-V8900S Operating Instructions Manual

Recording from a
tape
— High-speed Dubbing
You can use TYPE I (normal) or TYPE II
(CrO ) tapes.
2
1/u
(Power)
3 1
1
Press 6 EJECT and insert a
recorded tape in deck A and a blank
tape in deck B.
With the side you want to
play/record on facing forward
ª ª
p 0 )
6
2
Press H SPEED DUB.
Deck B stands by for recording.
3
Press DIRECTION repeatedly to
select A to record on one side or
ß to record on both sides.
p
4 1 2
ª ª
p 0 )
P r
6
4
Press P.
Dubbing starts.
When dubbing ends, decks A and B
automatically stop.
To stop dubbing
Press p on deck A or B.
Tips
• When you dub on both sides, start recording from
the front side. If you start from the reverse side,
recording stops at the end of the reverse side.
• You don't have to set DOLBY NR, since the tape in
deck B is automatically recorded in the same state
as the tape in deck A.
Notes
• You cannot record the surround effect.
• If you set DIRECTION to ß when the tapes you
use have different lengths, the tape in each deck
reverses independently.
If you want to start dubbing from the same point
for the other side, set DIRECTION to A and
reversed tapes manually after both decks stop.
Then press H SPEED DUB again to start recording
the other side.
23