Playing A Tape - Sony LBT-V8900S Operating Instructions Manual

Tips
• If you want to record on the reverse side, press ª
after pressing r REC in step 5 so the indicator on
the ª button (for the reverse side) lights up
green.
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• To record non-preset stations, select "MANUAL"
in step 2, then press TUNING +/– to tune in the
desired station.
• When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY NR
before step 7 so "DOLBY NR B" appears in the
display.
• To record with surround effect, press DSP so
"SUR " appears in the display.
The equalizer settings will not be recorded.
• If noise is heard while recording from the radio,
move the appropriate antenna to reduce the noise.

Playing a tape

You can play any type of tape, TYPE I
(normal), TYPE II (CrO
The deck automatically detects the tape type.
To select either deck A or B, press
DECK A "" or DECK B "" on the remote.
1/u
0/
3
)
(Power)
p
2 1
DOLBY NR
) or TYPE IV (metal).
2
0/
3
)
VOLUME
p P
1
DOLBY NR
DECK A ""/
DECK B ""
P
p
0/)
VOL +/–
continued
21