Honda 1994 Accord Wagon Reference Owner's Manual page 47

Steering Wheel Controls
RESUME/
accel
SET/
decel
When you tap the brake or clutch
pedal (manual transmission cars),
or press the SET and RESUME
buttons at the same time, the
CRUISE CONTROL light on the
instrument panel will go out and
the car will begin to slow down.
You can use the accelerator pedal
in the normal way.
Instruments and Controls
If you use the brake or clutch
pedal to cancel cruise control, the
system retains the previously set
cruising speed. To return to that
speed, accelerate to above 25
mph (40 km/h) and press the
RESUME/accel button until the
CRUISE CONTROL light comes on.
The car will accelerate to the
same cruising speed as before.
If you cancel cruise control by
pressing the SET and RESUME
BUTTONS at the same time, the
previously set cruising speed is
erased. To use the cruise control,
accelerate to the desired cruising
speed and press the SET/decel
button.
Pressing the Cruise Control
Master Switch turns the system
completely off and erases the
previous cruising speed from
memory. To use the system again,
refer to Using the Cruise
Control.