Honda 1994 Accord Wagon Reference Owner's Manual page 34

Door and Brake Lamp
Monitor
The appropriate light comes on in
this display if the tailgate or any
door is not closed tightly. If a
brake lamp (except for the
high-mount stoplight) does not
work, the BRAKE LAMP indicator
comes on when you push the
brake pedal with the ignition
switch ON (II).
A burned out brake light is a
hazard when drivers behind you
cannot tell you are braking. Have
your brake lights repaired right
away.
All the lights in the monitor
display come on for a few
seconds when you turn the
ignition switch ON (II).
Turn Signal and
Hazard
Warning
Indicators
The left or right turn signal light
blinks when you signal a lane
change or turn. If the light does
not blink or blinks rapidly, it
usually means one of the turn
signal bulbs is burned out (see
page 158). Replace it as soon as
possible, since other drivers
cannot see that you are signaling.
When you turn on the Hazard
Warning switch, both turn signal
lights blink. All turn signals on the
outside of the car should flash.
Indicator Lights
High Beam Indicator
This light comes on with the
high beam headlights. See page
for information on the headlight
controls.
Canada
Daytime Running
Lights (DRL) Indicator
Canadian models only
This indicator lights when you turn
the ignition ON (II) with the
headlight switch off and the parking
brake set. It should go off if you turn
on the headlights or release the
parking brake. If it comes on at any
other time, it means there is a
problem with the DRL. There may
also be a problem with the high
beam headlights.
Instruments and Controls
39