Honda 1994 Accord Wagon Reference Owner's Manual page 157

Lights
2. Remove the electrical
connector from the bulb by
squeezing the connector to
unlock the tab while you push
down on the connector.
3. Remove the bulb by turning it
one-quarter turn
counterclockwise.
4. Insert the new bulb into the
hole, and turn the bulb in
one-quarter turn clockwise.
5. Push the electrical connector
back onto the bulb. Make sure
it is on all the way.
6. Turn on the headlights to test
the new bulb.
7. (Passenger's side)
Reinstall the radiator reserve
tank and the intake air tube.
Maintenance
Replacing a Front Turn Signal
Light Bulb
1. Use a long-handled, #2 Phillips
screwdriver to loosen the turn
signal assembly mounting
screw.
2. Remove the turn signal
assembly from the bumper.
TURN SIGNAL ASSEMBLY
BULB
BULB HOLDER
3. Remove the bulb holder from
the turn signal assembly by
turning it counterclockwise.
4. Remove the burned out bulb
from the socket by pushing it
in and turning counterclock-
wise until it unlocks. Install
the new bulb.
5. Push the bulb holder into the
turn signal assembly, and turn
it clockwise until it locks.