Table of Contents
Advertisement
Tail lights, bulb replacement
At a glance
1
Turn signal/brake lamp
2
Reversing lamp
3
Inside brake lamp
4
Rear lamp
5
Outside brake lamp
6
Rear reflector
Turn signal, outer brake, tail, and
license plate lights
Follow general instructions, refer to page 193.
These lights feature LED technology.
Contact your service center in the event of a
malfunction.
Lights in the trunk lid
Access to the lights
If necessary, remove the fasteners using the
screwdriver from the onboard vehicle tool kit
and fold away the cover.
Online Edition for Part no. 01 40 2 954 258 - II/15
Replacing components
Inside brake lamp
Follow general instructions, refer to page 193.
24-watt bulb, HP24W.
1.
Squeeze the bulb holder and pull it out.
2.
Pull off the connector.
3.
Replace the bulb.
4.
Mount the bulb holder and the cover of the
trunk lid in reverse order.
Reversing lamp
Follow general instructions, refer to page 193.
16-watt bulb, W16W.
1.
Unscrew the bulb holder counterclockwise.
2.
Pull out the bulb and replace it.
3.
Mount the bulb holder and the cover of the
trunk lid in reverse order.
Changing wheels
Hints
When sealants are used, an immediate wheel
change when there is a loss of tire inflation
Mobility
195
Advertisement
Table of Contents
