Table of Contents
Advertisement
Screw thread for tow fitting
Push out the cover by pressing on the top
edge.
Tow-starting
Note: M double-clutch transmission
Do not tow-start the vehicle.
Tow-starting the engine is not possible due to
the transmission.
Have the cause of the starting problems fixed.
Manual transmission
If possible, do not tow-start the vehicle but
start the engine by jump-starting, refer to
page 199. If the vehicle is equipped with a cat‐
alytic converter, only tow-start while the en‐
gine is cold.
1.
Switch on the hazard warning system and
comply with local regulations.
2.
Ignition, refer to page 64, on.
3.
Engage third gear.
4.
Have the vehicle tow-started with the
clutch pedal pressed and slowly release
the pedal. After the engine starts, immedi‐
ately press on the clutch pedal again.
5.
Stop at a suitable location, remove the tow
bar or rope, and switch off the hazard
warning system.
6.
Have the vehicle checked.
Online Edition for Part no. 01 40 2 954 258 - II/15
Breakdown assistance
Mobility
203
Advertisement
Table of Contents
