License Plate Lamps - BMW 5 SERIES SEDAN Owner's Manual

Mobility
3. Unscrew the bulb holder counterclockwise.
4. Remove the bulb and replace it.
5. Insert the new bulb and attach the cover in
the reverse order.
LED headlamps
At a glance
1 Corner-illuminating lamps
2 Low beams/high beams
3 Parking lamp, daytime running lights
4 Turn signal
5 Side marker lamps
Light-emitting diodes (LEDs)
Follow the general instructions on Lamps and
bulbs, refer to page 233.
With LED headlamps, all front lamps and side
indicators are designed with LED technology.
If an LED fails, switch on the front fog lamps
and continue the trip with great care. Comply
with local regulations.
Contact your service center in the event of a
malfunction.
236
Replacing components
Online Edition for Part no. 01 40 2 911 177 - VI/13
Halogen front fog lamp
Follow the general instructions on lamps and
bulbs, refer to page 233.
35-watt bulb, H8
Contact your service center in the event of a
malfunction.
LED front fog lamps
Follow the general instructions on Lamps and
bulbs, refer to page 233.
These front fog lamps are made using LED
technology. Contact your service center in the
event of a malfunction.
Tail lamps, bulb replacement
At a glance
1 Turn signal
2 Reversing lamp
3 Inside brake lamp
4 Tail lamp
5 Outside brake lamp
6 Rear reflector
Turn signal, outer brake, tail, and

license plate lamps

Follow the general instructions on lamps and
bulbs, refer to page 233.
These lights feature LED technology.
Contact your service center in the event of a
malfunction.