Changing A Wheel; Licence Plate Lights - BMW 320i Owner's Handbook Manual

Lights in the side panel
1. Using a screwdriver, pry off the cover in the
luggage compartment or release the turn-
lock fastener by turning it counter-clock-
wise and remove the cover.
2. Unfasten the bulb holder with clip, see
arrow, and pull out.
3. Press the bulb in slightly and turn to the left,
take out and change it.
4. Re-engage the bulb holder so that it audibly
clicks into place.
5. Reattach the cover in the luggage compart-
ment.

Licence plate lights

5 watt bulb, C 5 W
1. Using a screwdriver, push the light to the
left in the flap of the light housing.
2. Take out the light towards the right and
change the bulb.
3. Insert the light.
Centre brake light
This light uses LED technology. In the event of a
fault, please contact BMW Service or a work-
shop that operates to BMW specifications and
has suitably trained personnel.
110
Online Edition for Part-No. 01 41 0 159 204 - © 03/05 BMW AG
Light-emitting diodes LEDs
Controls, displays and other equipment items
inside your car have light-emitting diodes
behind a cover as their light source. These
LEDs resemble conventional lasers and are
classified by law as Class 1 light-emitting
diodes.
Do not remove the covers or expose the
eyes directly to the unfiltered light source
for several hours at a time, as this could cause
irritation to the retina.<

Changing a wheel

Your BMW is fitted with run-flat tyres as stand-
ard. This dispenses with the need to change a
wheel immediately in the event of a puncture.
The symbol identifying run-flat tyres is a circle
with the letters RSC on the sidewall, see Run-
flat tyres, page 97.
When fitting new tyres or changing over from
summer to winter tyres and vice versa, fit run-
flat tyres for your own safety. In the event of a
flat, moreover, no spare wheel is available.
BMW Service will be glad to advise you on this.
See also New wheels and tyres, page 97.
The tools for changing wheels are availa-
ble as optional accessories from BMW
Service.<
Jack mounting points
The jacking points are at the positions shown in
the illustration.