Table of Contents
Advertisement
Controls
Selecting driving program using
button in center console
Press button repeatedly until the de‐
sired driving program is displayed in
the instrument cluster.
Selecting driving program using
M Drive
On the Control Display:
1.
"Settings"
2.
"M Drive 1" or "M Drive 2"
3.
Select the symbol.
4.
"Mode"
5.
Turn the controller until the desired setting
is reached and press the controller.
▷
"D": drive mode
▷
"S": sequential mode.
6.
"Shift position"
7.
Turn the controller until the desired setting
is reached and press the controller.
8.
Selecting another driving program.
When M Drive is active, setting is immedi‐
ately applied.
To activate M Drive with the selected settings,
press the corresponding button on the steer‐
ing wheel:
▷
▷
76
Driving
Online Edition for Part no. 01 40 2 954 258 - II/15
Risk of an accident
Use the settings for DSC in M Drive; oth‐
erwise, driving stability may be impaired, and
there is risk of an accident.◀
Display in the instrument cluster
Selected driving program corre‐
sponds to the number of illumi‐
nated fields.
Launch Control
The concept
Launch Control enables optimum acceleration
on surfaces with good traction.
Hints
Component wear
Do not use Launch Control too often;
otherwise, this may result in premature wear of
components due to the high stress placed on
the vehicle.◀
Do not use Launch Control during the break-in,
refer to page 162, period.
Requirements
Launch Control is available when the engine is
warmed up, that is, after uninterrupted driving
of at least 6 miles/10 km.
To start with Launch Control do not steer the
steering wheel.
Activate Launch Control
1.
Deactivate Dynamic Stability Control, refer
to page 126.
2.
Select Sequential mode with gear 1 and
driving program 3.
3.
With the engine running, apply the brake
with the left foot.
Advertisement
Table of Contents
