Anchor Explorer PB-2500 Owner's Manual
  1. Manuals
  2. Brands
  3. Anchor Manuals
  4. Speakers
  5. Explorer PB-2500
  6. Owner's manual

Anchor Explorer PB-2500 Owner's Manual

Hide thumbs

Advertisement

Table of Contents

Enlarged version

Troubleshooting Guide

Having trouble with the sound system?
Condition
Possible Solution
(italic text below denotes battery models only)
No sound
:
• turn POWER switch ON
(power LED not lit)
• charge battery
Charge indicator doesn't light:
• check / replace fuse
No sound
:
• check for output from source
(power LED lights)
• make sure all cables are completely plugged in
• turn up volume control of input used
• remove plug from speaker output if not using
external speaker output (AC model only)
Shortened battery life:
• charge battery fully; if battery life continues to
deteriorate, contact Anchor customer service
• reduce volume to eliminate distortion
Distorted sound:
• lower system volume control
• reduce source output level
Excessive hum or noise:
• use shielded cables
• use balanced microphone
Having trouble with the wireless system?
Condition
Possible Solution
No sound
• set MUTE switch to ON (handheld mic only)
(TX ON indicator lights):
• turn up WIRELESS volume control
• make sure mic is plugged into bodypack
transmitter
No sound (TX ON indicator off): • turn Explorer POWER switch ON
• make sure transmitter power switch is ON
• set receiver and transmitter to same channel
• replace battery in transmitter
ANCHOR Audio, Inc. (310) 784-2300
100-0046-000 / Revision B, 06/97
(Wireless models only.)
Explorer
Owner
s Manual
'

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Explorer PB-2500 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Anchor Explorer PB-2500

Summary of Contents for Anchor Explorer PB-2500

  • Page 1: Troubleshooting Guide

    • remove plug from speaker output if not using external speaker output (AC model only) Shortened battery life: • charge battery fully; if battery life continues to deteriorate, contact Anchor customer service • reduce volume to eliminate distortion Distorted sound: • lower system volume control •...

  • Page 2: Important Safeguards

    DATE OF MANUFACTURE The date of manufacture of this Anchor Audio product can be determined by the seven or eight digit serial number code. The fifth and sixth digits from the right denote the year, the seventh digit (letter) from the right denotes the month (A=Jan, B=Feb, etc.) Example: "XD960083"...

  • Page 3: Quick Use Guide

    Battery Operation - Model PB-2500 Thank you for choosing an Anchor Audio portable sound system. Our products incorporate state-of-the-art design and the finest quality of materials and workmanship. We’re proud of our products and appreciate the confidence which Caring for the built-in battery you have shown by selecting an Anchor system.

  • Page 4: Getting Started

    Check unit carefully for damage which may have occurred Note: The transmitter power switch must be in the OFF position! during transit. Each Anchor product is carefully inspected at HANDHELD: Unscrew the battery compartment cover on the factory and packed in a special carton for safe transport.

  • Page 5: Feedback Information

    WIRELESS and then re-amplified by the system. This can form a self- receiver installed in your Anchor sound system. sustaining loop that can damage the sound system if allowed 1. The control panel of the sound system should have to continue.

  • Page 6: Operation

    50 watts max The output signal is a composite of all the inputs. Use it to LINE Anchor Audio, Inc. record your presentation, or to “daisy chain” another powered sound system to the Explorer for greater crowd coverage. Operating the sound system Speaker Output (AC models only) 1.

This manual is also suitable for:

Explorer pa-2500

Table of Contents