Operation And Important Riding Points; Starting The Engine - Yamaha X-Max YP125RA Owner's Manual

Read the Owner's Manual carefully to
become familiar with all controls. If
there is a control or function you do not
understand, ask your Yamaha dealer.
WARNING
Failure to familiarize yourself with
the controls can lead to loss of con-
trol, which could cause an accident
or injury.

OPERATION AND IMPORTANT RIDING POINTS

EAU15952
TIP
This model is equipped with a lean an-
gle sensor to stop the engine in case of
a turnover. In this case, the multi-func-
EWA10272
tion display indicates error code 30,
but this is not a malfunction. Turn the
key to "OFF" and then to "ON" to clear
the error code. Failing to do so will pre-
vent the engine from starting even
though the engine will crank when
pushing the start switch.
EAU48021

Starting the engine

NOTICE
See page 5-4 for engine break-in in-
structions prior to operating the ve-
hicle for the first time.
In order for the ignition circuit cut-off
system to enable starting, the side-
stand must be up.
See page 3-23 for more information.
1. Turn the key to "ON".
NOTICE
If a warning or indicator light does
not come on initially when the key is
turned to "ON", or if a warning or in-
5-1
The following warning light, indi-
cator light and indicators should
come on for a few seconds, then
go off.
 Engine trouble warning light
 Immobilizer system indicator
light
 V-belt replacement indicator
 Oil change indicator
 Fuel level warning light
EAUM3350
ECA10251
5
ECA11834