Position Busy - Toshiba Perception 4000 Quick Reference Manual

I

POSITION BUSY

To Enter Position Busy (Unattended)
Mode:
Press the POSITION BUSY switch.
I
Note: The console will be placed in a Position Busy
Pending state if the attendant is currently talking to
a party or making an outgoing call.
To Exit Position Busy (Unattended)
Mode:
Press the POSITION BUSY switch again.
I
I
Enter any required password.
I
RECALL OF STATION
TRANSFERS
To Retrieve Unanswered Station
Transfers:
Press the ANSWER key, the appropriate ICI
I
key, or the Loop key (if the call was placed on
a supervised loop).
I
The call will be handled as a new, incoming call.
I
SUPERVISED LOOP
OPERATION
To Place a Call on a Supervised Loop:
While in the talking state, press the Supervise
I
(SPVS) access key.
I
Dial the destination.
• Press the Split (SPLT) access key if you
hear busy tone.
Press the RELEASE key.
I
To Monitor a Supervised Call:
I
Press the Loop key associated with the lit
ATTENDANT LED.
I
Monitor the call (in a listen-only capacity).
Press the SPVS key to place the call back on a
I
supervised loop.
Press the RELEASE key.
I
AT T E N D A N T C O N S O L E
Q U I C K R E F E R E N C E
-8-
G U I D E