Answering An Incoming Call; Attendant Overflow - Toshiba Perception 4000 Quick Reference Manual

I
ANSWERING AN INCOMING
CALL
Using the ANSWER Key:
I
Receive an incoming call signal.
Press the ANSWER key.
I
I
Dial the destination.
Press the RELEASE key or the ANSWER
I
key.
Using an Incoming Call Identification
(ICI) Access Key:
I
Receive an incoming call signal.
Press the ICI key.
I
I
Dial the destination.
Press the RELEASE or the ANSWER key.
I
I
ATTENDANT END-TO-END
SIGNALING
To Send DTMF Tones:
Press the DTMF (AEE) access key.
I
I
Press the desired dialpad digit keys.
After pressing all desired digits, press the AEE
I
key again. DTMF tones will no longer be
transmitted when dialpad keys are pressed.
I

ATTENDANT OVERFLOW

To Activate Attendant Overflow:
Press the Attendant Overflow (OVF)
I
access key. (The OVF LED will light solid green,
indicating that the feature is on.)
To Deactivate Attendant Overflow:
Press the OVF key again. (The OVF LED will
I
extinguish, indicating that the feature is off.)
I
AUTODIAL
To Program an Autodial Key:
I
Ensure that the console is in the idle state.
Press the Program Mode (PRGM) access
I
key.
Press the Autodial (ADL) key to be
I
programmed.
I
Enter the number to be stored (up to 24 digits).
Press the PRGM key to exit Program Mode.
I
To Activate the Autodial Feature:
Press the appropriate ADL access key.
I
AT T E N D A N T C O N S O L E
Q U I C K R E F E R E N C E
-1-
G U I D E