Circuit Protections; Fuses (F601, F60, F603) - Sanyo PLC-HF15000L Service Manual

Circuit Protections

This projector provides the following circuit protections to operate in safety. If the abnormality occurs inside the pro-
jector, it will automatically turn off by operating one of the following protection circuits.
Fuses (F601, F602, F603)
Fuses are located inside of the projector. When the POW-
ER/LAMP indicators are not lighting, one of the fuses may
be opened. Check the fuses as following steps.
The fuses should be used with the following type;
Location : F601 / F603
Fuse Part No. : 323 025 1204
tYPe 8.0A 250V FuSe
215008, LItteL
Location : F602
Fuse Part No. : 323 021 7804
tYPe 6.3A 250V FuSe
210506.3, LItteL
How to replace the fuses
1. Remove the cabinet top, Main board, PFC/Ballast Box1-
following to "Mechanical disassembly".
. Remove the fuses F601, F60 and F603 on the AC Filter
board.
to install the fuses, take reversed step in the above.
F603
-5-
F601
F60
AC Filter board