Sanyo PLC-HF15000L Service Manual page 38

Mechanical Disassembly
12 Lens shift assy removal
(Before disassembling, make sure the lens should be adjusted to the center po-
sition.)
1 Remove  screws-A (T3x8) to remove the motor board.
 Remove  screws-B (T3x8) to remove the lens net board.
3 Remove 3 screws-C (T4x10) to remove the lens shift cover.
4 Remove 4 screws-D (M4x1) and 4 screws-E (M4x1) to remove the lens shift assy.
Lens shift motor (U/D)
Lens base net board
Lens shift assy
c
Motor board
A
A
Lens net board
d
d
d d
e
c
c
e
e
e
B B
Lens shift motor (L/R)
Sensor switch X
Cord
-38-
Sensor switch Y