Sanyo PLC-HF15000L Service Manual page 46

Optical Parts Disassembly
2-1 Polarized glasses(OUT)/pre-polarized glasses removal
Remove 1 screw-B (M.5x4) on each stopper and take the polarized glasses
upward off.
B
Polarized glass(OUT/R)1
Polarized glass(OUT/R)
Condenser lens
(red)
Mounting direction
Mount the pre-polarized glasses and polarized glasses as shown in the figure below.
Lcd panel/Prism top view
B-LCD panel
Blue Marker
Green Marker
B
(Green)
* Note on handling the pre-polarized glass(out/B)1
Pre-polarized glass(OUT/B)1 is a very sensitive parts. Grab the edge of
the glass by new gloves when handling the polarized glass.
Film side
Blue Marker
Prism
Film side
G-LCD panel
-46-
Polarized glass
(OUT/G)1
Polarized glass
(OUT/G)
B
(Blue)
Polarized glass
(OUT/B)
* When removing the outer Pre-polar-
Pre-Polarized
glass (OUT/B)1*
Black Marker Film side
Green Marker
Blue Marker
(Behind)
ized glass(OUT/B)1, remove the
inner Polarized glass(OUT/B) first.
Otherwise the edge of the holder
may scratch the surface of polar-
izged glass.
R-LCD panel
Red Marker