Specifications - Meridian Power Amplifier G Series Installation Manual

4

Specifications

I n t r o d u c t i o n
Distortion
Signal/Noise
Inputs
Sensitivity
Input
impedance
Outputs
Power output
Construction
Output stage
Trigger input
Dimensions
Weight
Controls
Indicators
Fan Control
G55
Less than 0.01%.
Better than -100dB.
Balanced on XLR and unbalanced on phono.
1.0V RMS phono/per leg balanced.
16kΩ phono, 32kΩ balanced.
Twin outputs for bi-wiring.
5 channels at 100W into 8Ω, or
2 channels at >300W into 8Ω
bridged and 1 channel at 100W.
Low feedback design. Ultra low impedance error corrected output stage. DC coupled with no capacitors in signal path.
Fully balanced inputs. Optimised magnetic circuit design. Full DC and thermal overload protection. Meridian proprietry
soft start.
25 pairs of 15A output devices and
68,000µf of audiophile-grade PSU
smoothing capacitors.
5-30VDC.
440mm x 132mm x 350mm (17.32"
x 5.20" x 13.78") WHD.
20kg (44lb).
Standby button; On/Off, bridge mode, and balanced/unbalanced switches.
Standby and channel operation LEDs.
Fan control output for connection to a Meridian rack mount kit.
G56
Less than 0.01%.
Better than -100dB.
1.0V RMS phono/per leg balanced.
16kΩ phono, 32kΩ balanced.
Twin outputs for bi-wiring.
2 channels at 100W into 8Ω,
>300W into 8Ω bridged, >350W
into 4Ω bridged.
Dual Mono construction. 4 pairs of
15A output devices per side. 2 high-
quality audiophile-grade smoothing
capacitors per side (27,200µF used
in total).
5-30VDC.
440mm x 90mm x 350mm (17.32" x
3.54" x 13.78") WHD.
13.5kg (30lb).
Standby and channel operation LEDs.
G57
Less than 0.01%.
Better than -100dB.
1.4V RMS phono/per leg balanced.
16kΩ phono, 32kΩ balanced.
Twin outputs for bi-wiring.
2 channels at 200W into 8Ω,
>620W into 8Ω bridged, 1000W
into 4Ω bridged.
Dual-mono construction. 5 pairs of
15A output devices. 2 high-quality
smoothing capacitors per side
(40,000µF used in total).
5-30VDC.
440mm x 132mm x 350mm (17.32"
x 5.2" x 13.78") WHD.
24kg (53lb).
Standby and channel operation LEDs.