Meridian Power Amplifier G Series Installation Manual page 16

1 2
I n s t a l l i n g
t h e p o w e r
a m p l i f i e r
To connect to each channel of a G68AXV or G68XXV Digital Surround Controller
Three G56 or G57 Two-channel Power Amplifiers can be used
in bridge mode for each of the front channels of a G68AXV
or G68XXV Digital Surround Controller, which are provided as
balanced outputs.
• Switch the BRIDGE MODE switch to the ON position.
• Fit the supplied bridge mode link between the left and right
negative terminals.
• Connect the LEFT, RIGHT, and CENTRE balanced outputs from the
G68AXV or G68XXV to the left BALANCED input on the G56 or
G57.
• Switch the channels to the BALANCED position.
G68AXV/XXV Digital Surround Controller
SIDE LR REAR LR A/B LR
LEFT RIGHT CENTRE SUB
G56/G57
ON
2 x G56/G57 Two-channel Power Amplifiers