Outputs - Meridian Power Amplifier G Series Installation Manual

Outputs

G55 Five-channel Power Amplifier
������ ���� ����� ���
�������� � � �
������ ������ ����
��� �������� � � �
������� � ������ ������ ����
���
�� ���
����������
��������
���� ��� ������ ����
������ ���� ��
�������� ���
������ ���� ���
������� ������� � �� ������� �
Use this output To connect to this
CHANNEL 1 to CHANNEL 5 Loudspeakers of 2Ω to 15Ω, using either plug or bare wire connections.
FAN OUTPUT A Meridian rack mount kit. This is a proprietary Meridian connection.
The recommended assignment of channels, to make best use of the
capacity of each power supply, is as follows:
Channels 1 & 2 main left and right; channel 3 centre; channels 4 &
5 rear left and right respectively.
Alternatively, channels 1/2 and 4/5 can be used in bridge output
mode; see To wire to passive loudspeakers in bridge mode ,
page 15.
������� � ������� �
���������� ����������
�������� ��������
Each channel of the G55 Five-channel Power Amplifier provides
twin outputs for bi-wiring. On speakers that provide separate
connections to the bass/mid and tweeter units this allows the units
to be connected independently to the power amplifier, for optimum
sound quality.
Alternatively, for loudspeakers providing a single pair of inputs,
either of the output terminals can be used.
������ ���� ����� ��� �������� � � �
������ ������ ����
��� �������� � � �
������� � ������� � ������ ������ ����
���
�� ���
���������� ����������
�������� ��������
���� ��� ������ ����
������ ���� ��
�������� ���
������ ���� ���
I n s t a l l i n g
t h e p o w e r
a m p l i f i e r
����� �����
�������� ��������� ���
������� ������� ����
���� ���� ����
����� ��� ��� � ����
���� ��� ��� � ����
�� ���
�����
��� ����
������� �����
� � ���
�� �� ��
��� ������
��������
����������
��� ������
1 3