Table of Contents
Advertisement
CAUTION:
The MVP502 was tested with a four point webbing system, with the back in the
upright position. Please leave the headrest in place during transportation.
Fitting the front restraint
Fitting seat beat
Fasten the 3 point safety belt around the user.
The occupied wheelchair should be located in a forward-facing configuration, with the parking brake applied.
Pelvic restraints should make full contact across the front of the body near the junction of the thigh and pelvic as pictured below
(correct seat belt position).
Restrains should not be held away from body by wheelchair components such as armrest or wheels as pictured below (Incorrect
seat belt position).
Correct seat belt position
Fitting the rear restraint
Incorrect seat belt position
21
Advertisement
Table of Contents
