Table of Contents
Advertisement
Do: Maintain correct tire pressure if using pneumatic tires.
Do not: Try to remove the wheels while the wheelchair is occupied even it is equipped with anti-tippers.
4.2.7 Safety Belt (Option)
How to assemble and disassemble the Safety Belt
Loosen the fourth and fifth screws of both side of seat upholstery and insert the Safety Belt in between the fourth and fifth screw
holes. (See Figure 4.41)
Keep the safety Belt at 45 degrees for comfortable usage. (See Figure 4.42)
Put the seat upholstery back and tighten screws.
Adjusting length of seat belt
Push the two sides of belt through buckle so as to get the belt longer or shorter. (Figure 4.43 and Figure 4.44)
Pull the two sides of belt tightly. (Figure 4.45)
Push buckle up to the plastic clip so that the belt cannot slip out of its position. Do make sure that there is no gap between the clip
and the buckle. (Figure 4.46)
Figure 4.41
Figure 4.42
14
Advertisement
Table of Contents
