Transport And Storage - Karman Healthcare MVP 502 series Owner's Manual

SUGGESTION:
We recommend that the belt be fitted tightly around the pelvis. Please keep tighten
the belt until there is a small space left between the user and the seat belt, which
allows fingers only. Please check if the belt is fastened correctly as recommended.
If you are not able to do so, please consult your supplier.
Figure 4.43
How to operate:
When you sit on the wheelchair, do fasten the safety belt.
Adjust the belt and make it fit your body for comfort and security.
When you are not using it, please fasten the belt to avoid the belt dropping into the rear wheels.
Maintenance
The safety belt is made of 100% polyester fiber and the clasp is made of plastics. It
does not require any maintenance, but should be inspected each month to ensure
that the edges are not frayed, and weekly to make sure that it fits the user correctly.
If there are any signs of its being worn out, please replace it with a new one
immediately.

4.2.8 Transport and Storage

Make sure the wheelchair is folded when stored.
SUGGESTION:
Please store the wheelchair in a location which is out of direct sunlight, rain, and
dew. For more details, consult your Karma dealer.
WARNING:
Don't put anything on the wheelchair while it is in storage.
Putting goods on a folded wheelchair will cause damage,
which is not covered by its warranty. (See Figure 4.47)
4.3 Transferring In and Out
4.3.1 Transferring In
Engage both hand brakes.
Turn the footplates up and swing them to the side.
The user may get into the seat using the armrests as support.
Turn the footplates back down on which the user's feet can be placed. Release both hand brakes.
Figure 4.44 Figure 4.45
15
Figure 4.46
Figure 4.47