Stairmaster Turbo Trainer Operating Instructions

Turbo Trainer Operating Instructions

Button Function

（MODE）
1. Press to select pre-programmed time, mileage, calories burned
2. Press to show display on LCD and stop SCAN function
3. Press this button to confirm setting, after completing making selections
（SET）
1. During set program, press this button to set time, mileage, calories... etc options
2. Press this button and hold on for two seconds to speed up increase in ?
3. During scan mode, press this button and hold for five seconds to proceed to kilometer/mileage
measurement conversion
（RESET）
1. During set program, press this button to reset to default setting
2. Press this button and hold for two seconds to reset all records to zero, except mileage/distance
recording

Function and Operation: How to

1. Battery replacement

Please place two 1.5V AA batteries on back of digital clock
(All settings will reset to zero every time the batteries are removed/replaced)

2. Auto-power on/off

Upon start usage of machine, LCD automatically displays all available values. Once stop usage of
machine for 60 seconds, LCD automatically turns off, and all values are reset to zero. Upon next
workout, LCD will display all available values