Table of Contents
Advertisement
Correcting keystone
Keystoning refers to the situation where the projected image is noticeably wider at either
the top or bottom. It occurs when the projector is not perpendicular to the screen.
You can correct this automatically following these steps:
1.
Press MENU and then press
2.
Press
To manually correct this, you will need to
follow these steps:
1.
Do one of the following steps to
display the keystone correction page.
•
•
•
2.
The 2D Keystone correction page
displays. Press
keystoning at the top of the image.
Press
the bottom of the image. Press
side of the image. Press
the image.
Adjusting Corner Fit
You can manually adjust four corners of the image by setting the horizontal and vertical
values.
1.
Do one of the following steps to display the
corner fit correction page.
•
•
2.
Press
press OK.
24
Operation
to highlight Auto Keystone and press
Press KEYSTONE on the
remote control.
Press QUICK INSTALL on
the remote control. Press
to highlight 2D Keystone and
press OK.
Press MENU and then press
/
until the DISPLAY
menu is highlighted. Press
to highlight 2D Keystone and
press OK.
to correct
to correct keystoning at
Press QUICK INSTALL on the remote
control. Press
to highlight Corner Fit
and press OK.
Press MENU and then press
the DISPLAY menu is highlighted. Press
to highlight Corner Fit and press OK.
/
/
/
to select one corner and
/
until the DISPLAY menu is highlighted.
on the projector to correct keystoning at the right
on the projector to correct keystoning at the left side of
/
until
/
to select On.
2D Keystone
.
Press
Press
.
Press
Press
Corner Fit
Back
.
.
Back
Advertisement
Table of Contents
