Table of Contents
Advertisement
Positioning your projector
Choosing a location
Your room layout or personal preference will dictate which installation location you select.
Take into consideration the size and position of your screen, the location of a suitable
power outlet, as well as the location and distance between the projector and the rest of
your equipment.
Your projector is designed to be installed in one of the following possible installation
locations. Corresponding setting can be made in the OSD menu.
1.
Front Table
Select this location with the projector
placed on the table in front of the screen.
This is the most common way to position
the projector for quick setup and
portability.
2.
Front Ceiling
Select this location with the projector
suspended upside-down from the ceiling in
front of the screen.
Purchase the BenQ Projector Ceiling
Mount Kit from your dealer to mount your
projector on the ceiling.
After turning on the projector, you can set the projector position by one of the following
steps.
•
Press MENU and then press
highlighted. Press
setting.
•
Press QUICK INSTALL on the remote control and then press
Projector Installation is highlighted. Press OK and press
14
Positioning your projector
/
until the SYSTEM SETUP: Basic menu is
to highlight Projector Installation and press
3.
Rear Ceiling
Select this location with the projector
suspended upside-down from the ceiling
behind the screen.
Note that a special rear projection screen
and the BenQ Projector Ceiling Mount Kit
are required for this installation location.
4.
Rear Table
Select this location with the projector
placed on the table behind the screen.
Note that a special rear projection screen
is required.
/
/
to select a
/
until
to select a setting.
Advertisement
Table of Contents
