Table of Contents
Advertisement
5
F
6
Installing the Hopper Heat Shield.
Insert stainless H Heat Shield between
hopper and heater by dropping from the top
down into position. Tabs in H Heat Shield will
sit in slots on C Hopper Brackets.
6
F
7
Installing the Hopper Lid. Attach D
Hopper Lid using two 10/32 x ½'' bolts
and lock nuts. Do not tighten past threads
on nut to allow for enough room so lid shuts
completely when closed.
7
7
www.newfireoutdoors.com | 1-800-977-7344
C
C
H
D
F
8
Installing Spring Handles. Place
Attach spring handles to the shut
off plate, doors and N Damper by twisting
clockwise until secure. Do not overtighten on
doors allowing them to move freely. Install G
Hopper Handle using two ¼-20 x ¾'' bolts
inserted through holes on handle.
8
9
Installing the Grill Rails. T Brackets
should face downward. Using two 1/ 4 '' metal
screws perrail. Align over holes and tighten.
9
10
Installing Grills. Insert Bottom Grill.
Insert at angle to allow clearance.
Insert Top Grill.
N
G
T
T
Advertisement
Table of Contents
