Installation - Newfire Cascade Owner's Manual

SHUTOFFS:
The stove is supplied with one hopper shutoffs. Attach spring handle to shutoff. Thehopper has a
slot for centering the shutoff. When shutting off stove slide shutoff down back side off hopper until
you reach a fully closed position. You must be able to shut hopper lid to ensure stove shutoff is in
proper position.
Once again, thank you for choosing the Cascade Complete Cookstove. We
hope you enjoy this step by step instructional manual. If you have any issues,
problems, or concerns, please contact us at in the following ways:
Call Us Toll-Free:
1-800-977-7433
7:30am - 5:00pm CST Monday - Friday
Live Chat:
7:30am - 5:00pm CST Monday - Friday

INSTALLATION

NOTE BEFORE INSTALLATION:
This heater is intended to be used outdoors only! It should never be used in an enclosed area or a
confined space.
The installation must conform with local, state and federal codes. In absence of such
codes, install in accordance with the current American National Standard (ANSI) / National
Fire Protection Association (NFPA) codes. Please check local EPA laws to conform with
MINIMUM CLEARANCES:
A minimum 36" clearance from this heater and all its parts to combustible materials must be
maintained at all times while the heater is in operation.
This Heater is to be used on a flat level non-combustible surface only. Install on flat level non-
combustible surface (concrete, tile, stone, etc.)
9 www.newfireoutdoors.com | 1-800-977-7344
Live Chat:
Service@NewfireOutdoors.com
Mail:
Newfire Outdoors.
2625 Kotter Avenue
Evansville, IN 47715
WARNING
local regulations.