Connecting To Other Equipment - Meridian DSP Loudspeaker User Manual

Connecting to other equipment

To connect two DSP loudspeakers to a Meridian product with SpeakerLink
DSP loudspeaker – Slave
MERIDIAN MERIDIAN
SPEAKERLINK COMMS
INPUT OUTPUT INPUT OUTPUT
SpeakerLink lead
You can create a complete system by connecting a pair
of DSP loudspeakers directly to a digital source. The
DSP loudspeakers include volume, balance, and tone
controls allowing you to control the system using the
MSR+.
If the Meridian source or control unit includes a
Meridian SpeakerLink output, such as the Meridian
808.2 CD Player, you can make all the connections
using SpeakerLink leads.
• Connect the MERIDIAN SPEAKERLINK OUTPUT
from the Meridian source or control unit to the
MERIDIAN SPEAKERLINK INPUT on the DSP
Meridian 808.2 CD Player
MERIDIAN
SPEAKERLINK
DIGITAL MERIDIAN
SPEAKERLINK
INPUT OUTPUT INPUT OUTPUT
•
•
SpeakerLink lead
DSP loudspeaker – Master
MERIDIAN DIGITAL
COMMS
INPUT OUTPUT INPUT OUTPUT
loudspeaker chosen as the master, using a
SpeakerLink lead.
Connect the MERIDIAN SPEAKERLINK OUTPUT
from the master DSP loudspeaker to the MERIDIAN
SPEAKERLINK INPUT on the other (slave) DSP
loudspeaker, using a SpeakerLink lead.
Configure the master DSP loudspeaker as M.RJ45
and the slave DSP loudspeaker as S.RJ45; see To
choose master or slave and the primary connector ,
page 34.
21
Connecting up the
DSP loudspeakers