NEC Univerge SV8500 Reference Sheet page 2

CALLBACK
If you dial a busy extension.
φ Press
CALL BACK (CB) soft Key
or dial Access code____.
φ Replace
Handset.
During this time you may make and receive
calls.
φ
When both extensions are free,
your phone will ring
φ
Lift handset or press Speaker
and the other extension will ring.
To Cancel
φ
Lift handset and press CALL
BACK (CB) soft key or dial
Access code_____.
CALL FORWARD – ALL*
Forwards all calls immediately.
To Set
φ
Lift Handset and press FDA Key
or Dial Access code_____
φ
Dial destination number.
φ
Replace Handset.
To Cancel
,
φ
Lift handset and press FDA key
or dial Access Code _____.
CALL FORWARD NO ANSWER *
Forwards calls only after 4 – 6 rings.
To Set
φ
Lift Handset and press FDN Key
or Dial Access code________.
φ
Dial destination number.
φ
Replace Handset.
To Cancel
φ
Lift handset and press FDN key,
or dial Access Code _______.
CALL FORWARD BUSY*
Forwards calls when your extension is busy.
To Set
φ
Lift Handset and press FDB Key or
Dial Access code_____
φ
Dial destination number.
φ
Replace Handset.
To Cancel
φ
Lift handset and press FDB key, or dial
Access Code _____.
LOGIN/LOGOUT
For IP Phones only.
To Login
φ
Enter Login code and press SET Soft
key.
φ
Enter password and press OK Soft
key.
To Logout
φ
Press LOGOUT key. (Display will show
LOGOUT?)
φ
Press LOGOUT key again and wait a
few seconds for handset to logout.
CALL PICK UP
To answer a ringing extension in your group :
φ
Lift handset and press PICK Soft key
or dial Access Code______.
For answering ringing extensions not in your
group:
φ
Lift handset, dial Access Code ______
plus ringing extension number.
VOICECALL
Allows a user to intercom other Digital handsets.
φ
Lift handset and dial extension number.
φ
Press VOICE Soft key and speak over the
intercom.
PROGRAMMING SPEED
NUMBERS
To Store Numbers using One-Touch Keys:
φ Press Feature button.
φ
Press an available One-Touch
Speed Calling key.
φ
Enter either extension number or
external number including '0' for an
outside line.
φ Press Feature button.
To Access
φ Press desired One-Touch Speed
Calling key or press Speaker and
One-Touch Speed Calling key to call
number.
DISPLAY
To adjust the Display:
Press the Cursor button up or down while the
phone is idle.
SPEAKER/RECEIVER VOLUME
To adjust the Speaker/Receiver Volume:
Press the Cursor button up or down during
conversation
RINGER VOLUME
To adjust the Ringing Volume:
Press the Cursor button up or down during
ringing.
SHORTCUT MENU
The user can access the shortcut menu by
pressing the Enter key (Center Cursor button).
To set the Voice Mail number in the
Shortcut Menu:
φ From the idle display, (Do not lift
handset).
φ Press the FEATURE button.
φ Press the Enter key.
φ Enter the Voice Mail pilot number.
φ Press FEATURE button to save.
To use:
φ Do not lift handset.
φ Press the Enter key.
φ Select either Missed Calls to see the
missed calls menu, or Voice Mail to
dial the voice mail pilot.
* RINGER VOLUME
On SV8300 press the * key and
receive service set tone.
NDA-31131
Issue 1.0