Usb Configuration - Asus Z170M-PLUS User Manual

The following items appear only when you set the SATA Mode Selection to [RAID].
CR#1/2/3 RST Pcie Storage Remapping [Disabled]
This item allows you to enable or disable the RST Pcie Storage Remapping feature.
Configuration options: [Auto] [Disabled] [Enabled]
Alternate ID [Disabled]
This item allows you to enable or disable the report for the alternate device ID.
Configuration options: [Auto] [Disabled] [Enabled]
SMART Self Test
This item allows you to enable or disable the SMART Self Test on all HDDs during POST.
SATA6G_1/2/3/4/5/6 (Gray) [Enabled]
Allows you to enable/disable the SATA6G_1/2/3/4/5/6 port. Configuration options: [Disabled]
[Enabled]
Hot Plug [Disabled]
These items allow you to enable/disable SATA Hot Plug Support. Configuration options:
[Disabled] [Enabled]
2.6.6

USB Configuration

The items in this menu allow you to change the USB‑related features.
The USB Devices item shows the auto‑detected values. If no USB device is detected, the
item shows None.
Legacy USB Support [Enabled]
[Enabled] Your system supports the USB devices in legacy operating systems.
[Disabled] Your USB devices can be used for BIOS setup only and cannot be
recognized in the boot devices list.
[Auto] Your system automatically detects the presence of USB devices at startup.
If any USB devices are detected, the legacy USB support is enabled.
XHCI Hand-off [Disabled]
[Enabled] Enables the support for operating systems without an XHCI hand‑off
feature.
[Disabled] Disables the XHCI Hand‑off support.
ASUS Z170M-PLUS 2‑35